P'R

Ready-to-use surface filler paste for filling interior holes and cracks.

Water, calcium carbonate, sand, resin and various additives.

The resulting paste is off-white in colour. 

All types of interior substrates : concrete, cellular concrete, cement, breeze block, brick, plasterboard, plaster tiles, plaster, old paint.

Primer coat, smooth surface filler, wall coverings, paint

• Filler meets EN 16566 standard

• DTU 59.1 : Paint work

• Density : 1.5

• Dry extract : 82 %

15 kg bucket on wrapped pallet.

9 months in original unopened packaging away from frost and high temperatures.

The temperature during application and drying must be between 8°C and 35°C.

Do not use on a damp substrate.

Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent.

Scrape, brush and remove dust from concrete, plasterboard and plaster tiles.

The cracks will first be opened into a 'V' and primed if the substrate is porous.

Applied by hand using a filling knife or spatula.

The thickness is 2 cm; to fill deeper holes, build up the filler in several steps

The maximum thickness will be 1 cm per coat. 

Clean tools with water.

Approximately 1 kg/m².

Approximately 6-12 hours, depending on the thickness, substrate and ambient conditions.

Surface filler to quickly fill cracks, holes and dents without cracking.