SEMIN F View larger

SEMIN F


Interior top coat

SEMIN F (FINE) is suitable for most surfaces (plasterboards and tiles, coatings, concrete, cement, old paintwork) and will adapt to slightly irregular substrates.

VOC: A+.

BENEFITS

• Excellent glide-on application 
• Very good finish quality
• Apply second coat before first coat has dried 


 
SEMIN F
TECHNICAL DETAILS

Powder coating for a good finish on interior walls and ceilings. 

Adapts to minor irregularities on the surface. Long working time. 


COMPOSITION AND APPEARANCE

Plaster, calcium carbonate, redispersable resin, rheological agents and various additives. 

The mixed paste is white in colour. 


SUITABLE SURFACES

interior walls and ceilings

• Plasterboards 

• Concrete 

• Old paintwork 

• Plaster-based smooth finish coating (SEMIN G) 

• Plaster tiles 

• Cement coating 

• Sealing 


COVERINGS

Wallpaper, paint, wall covering. 


TECHNICAL CHARACTERISTICS

• Setting time : 10 hours

• Density of powder : 0.9

• pH : 7

• Granulometry : fine

• Adhesion : complies with NFT 30 608 


PACK SIZE

5 and 25 kg bags on shrink-wrapped pallet. 


STORAGE

9 months in unopened original packaging, stored away from moisture. 

Classification AFNOR NFT 36.005 Family III - Class 3.


INSTRUCTIONS FOR USE

The temperature during application and drying must be between 8 and 35°C. 


PREPARATION OF SURFACES

Surfaces must comply with DTU 59.1, i.e. be clean, dry, hard and free from all traces of release agent.

On an uneven surface, apply a roughening coating first.

Smooth surface, brush and remove dust from concrete, plaster panels and tiles.

Wash, rinse and imprint old paintwork. 


QUANTITY OF MIXING WATER

Approx. 11 to 12 litres of water per 25 kg bag.

Mix the paste, preferably using a mechanical mixer.

Allow the resulting paste to rest for 5 minutes, then agitate again. 


APPLICATION

Apply manually using a smoothing trowel or a filling knife or blade.

Allow to harden and remove imperfections before sanding, if necessary.

Print the SEMIN FIN if applying satin-finish or gloss paint. 


AMOUNT REQUIRED

From 250 to 400 g/m². 


DRYING TIME

From 3 to 6 hours depending on the thickness of the support and ambient conditions. 


RECOMMENDED APPLICATION

Always wash old paint before applying.

To rinse off dirt streaks more easily, start washing from the base of the wall. 

 
Subscribe to our newsletter