Damp-proofing agent for terracotta tiles and paving blocks, natural stone, reconstituted stone, marble, limestone, opus and stoneware
Protects against virtually all kinds of stains-oil, wine, coffee, etc.
Ideally used for interior and exterior paving blocks. Does not alter the initial appearance of the material treated.
Referred to as an oil-repellent, this agent protects the surface against motor oil and grease.
2, 5 and 10 L cans,
12 months in unopened original packing protected from frost and high heat.
The temperature during application and drying must be between 6 and 30°C.
Do not apply onto windows and glass panes.
Check colour-fastness before applying onto glazed surfaces.
• Paving blocks
• Reconstitued stone
• Natural stoe
Do not apply on a wet surface or in wet weather.
Clean paving blocks, slabs or stones with a degreaser to restore the material’s original cleanliness.
Rinse and allow to dry. After complete drying, apply the waterproofing generously using a brush, a paint roller or a sprayer. Leave to dry for 4 to 6 hours in ideal weather conditions (6 to 30°C) before applying a second coat.
Do not walk on for 3 hours. The product is most effective after 24 hours. Clean tools with clean water.
Waterproofing for terracotta tiles, natural stone, reconstituted stone, marble, limestone, opus and fine stoneware. It protects against almost all stains (oil, wine, coffee).
It is ideal for use for outside and inside paving.
It does not change the initial look of the treated materials. A product is said to be oil repellent thanks to its action for protection against grease and oil from ca