ANTI LAITANCE View larger

ANTI LAITANCE


Paving – Cobblestones – Floor tiles

Ready to use in order to clean pavings slabs, cobblestones and tiles after grouting.

BENEFITS

Ready to use
• 2 in 1 ; anti foaming, water repellent and neutral

 
ANTI LAITANCE
TECHNICAL DEFINITION

ANTI LAITANCE cleans cement film after grouting work.

Ready to use, no need to dilute.

Properties : Thanks to its stripping action, the cleanser removes cement film residues

Surface : On paving or slabs to clean excess polymer sealant.

On tiles to clean excess grout.

ANTI LAITANCE also eliminates efflorescence.


TECHNICAL CHARACTERISTICS

• Colourless liquid, ready to use

• Low odour

• pH<1


SUITABLE SURFACES

Floor tiles, cobblestones, paving…


PACK SIZE

Containers of 1 and 5 litres.


STORAGE

Storage temperature between 0 and 40 °C, away from frost and high temperatures.


INSTRUCTIONS FOR USE

Product labelled as dangerous. Contains citric acid.

Refer to the safety labelling on the packaging.

Observe the precautions and safety advice.


APPLICATION

• CEMENT RESIDUE ON TILES : Spray on the areas to be cleaned. Leave for 5 minutes. Rinse with water

• CEMENT RESIDUE ON COBBLESTONES/ PAVING SLABS : Moisten the cobblestones and slabs until saturated, using a garden hose. Spray on the parts to be cleaned and leave for 5 minutes. Scrub with a scrubbing brush. Rinse with water and leave to dry. Repeat the process if necessary

• EFFLORESCENCE : Spray on the entire surface. Scrub with a brush and rinse thoroughly. Repeat the process if necessary. Warning - the product may change the colour of the cleaned surfaces.


AMOUNT REQUIRED

Floor tiles : 1 litre for 10m².

Cobblestones/paving : 1 litre for 2m².


RECOMMENDED APPLICATION

Proceed across a surface of 5m at a time. Do not let the product dry on the surface.

 
Subscribe to our newsletter