PROJECT EXTREM

Primer filler for vertical surfaces or for use on ceilings made from poured concrete or pre-slabs.

Ideal for preparing pre-slabs, shuttered concrete or for redecorating stippled walls or fibreglass before final painting.

Decorating filler, for smoothing over.

Smooth, matt finish.

Odour-free.

Solvents : Water. 

Filler : Calcium carbonates.

Additives : Dispersing agent, bactericidal fungicide. 

Thickeners : Cellulosic, polyacrylates. 

Binders : Acrylic dispersing agent. 

Density : 1.86. 

Dry matter : 75%.

• Fire classification: A2-S1, d0

• VOC content < 1 g/l

Interior : ideal for covering bricks, brick tiles, cement breeze blocks, cinder blocks, de-bubbling pre-slabs, shuttered concrete, aerated concrete, for redecorating stippled walls or old damaged surfaces.

The surfaces must be dry and clean, with between 6 and 16% moisture.

25 kg bags on wrapped pallet.

18 months unopened in original packaging in a frost-free place.

Do not apply at a temperature below +8°C or above +35°C with a humidity level of more than 70%.

Do not apply to overheated surfaces.

Do not apply to damp surfaces.

Applicable regulations : EN 16-566; painting filler for internal and/or external use.

NFT 36-005 : categorisation of paint products.

Preparation of the surfaces : as per French standard DTU 59.1.

First coat : 2 to 9 kg/m².

Second coat : 1.5 to 2 kg/m².

• The first coat should be levelled out using 60 cm scraper or skimmed with a rule.

• After drying, the second coat should be smoothed with a scraper.

• After allowing to set slightly, squeeze the filler at a slight angle using a clean scraper.

The use of goggles is recommended when spraying in order to protect your eyes from any small particles.

Tools : Sprayer (rotor/stator machine) for filler with and flat spray jet.

Clean tools with water.

Covering all types of fillers, paints and wall coverings.

From 12 to 72 hours, depending on the temperature, humidity and ventilation of the room.