RENOVATION COATING

Interior and exterior skim for walls and ceilings.

Use mixed with plaster or cement. 

May be used on the prepared surface of a facade for reinforced mesh between two coats. 

Paste product formulated from resin emulsion with mineral content and additives improving application of the mixed product. 

Poured concrete, prefabricated concrete panels, cement coating, aerated concrete, terracotta tiles, cement blocks, plaster...

When fully dry can be covered in thick plastic coating (TPC), paint, paste coatings. 

• Granulometry : up to 0.3 mm

• pH : 7

• Density : 1.5

Usage time for batch

• Mixed with cement : 2 1/2 hours

• Mixed with plaster : 1 hour

20 kg plastic buckets. 

9 months in unopened original packaging stored away from frost and intense heat. 

The temperature during application and drying must be between 8 and 35°C.

Never use the paste as it is: mix the product with exterior and interior cement (except for plaster-based surfaces) or with interior plaster.

Surfaces must be clean, sound, free from dust and all traces of oil.

Remove suspect surfaces, of those with a poor finish, by scraping.

Moisten surfaces if they are warm, or when the temperature during application is high.

Pour 1 part cement or plaster into 2 parts paste.

Mix together, preferably using a mechanical mixer on slow speed.

Up to 5 mm when mixed with cement.

Up to 50 mm when mixed with plaster.

Approx. 1 kg/m²/mm thickness.

This depends on ambient conditions, the type of surface and the thickness applied.

Period between two applications (2 mm thick): 3 to 5 hours.

Re-coating period: 3 days.

Use cement quality CEM II. Do not add water when mixing.