KEDOPLAN WALL WHITE

Interior and exterior skim mortar for walls and ceilings. Available in grey or white options. 

Cement-based mortar with mineral and resin content. 

Grey or white-coloured paste. 

Brick or breeze-block masonry, concrete, cement coating, aerated concrete, terracotta tiles. 

Overlaying

When completely dry, KEDOPLAN WALL may be covered with all types of paint, tiles, cement mortars and thick plastic coatings. 

• Test report CEBTP N° B252-7-385/2: Evaluation of performance

• Technical notice CSTB N°9/99-682

• Granulometry: up to 0.3 mm

• pH: 12

• Usage time for batch: 3 to 4 hours

• Density of powder: 1.2

• Density of paste: 1.6

25 kg bags on shrink-wrapped pallet. 

6 months in unopened original packaging stored away from moisture. 

Test report CEBTP N° B 252.7.385/2. TECHNICAL NOTICE N°9/99-682.

Dangerous, follow the instruction for use.

The temperature during application and drying must be between 8 and 35°C.

Do not add water to the mixture.

A batch of mortar which has started to set becomes unusable.

Do not apply to plaster.

Contains cement. Product labelled Xi irritant. Follow advice on use and the safety instructions on the packaging.

Refer to page 1 of this catalogue to find out how to look up the safety data files easily.

Surfaces must be clean, sound, free from dust and all traces of oil or paint. If necessary they must be correctly cleaned by brushing.

If the product is to be applied to suspect surfaces (too porous or insufficiently porous), use our primer PRIM-SM first.

5.5 litres of water per 25 kg bag.

Up to 1 cm in one pass.

1.3 kg/m²/mm thickness.

This depends on ambient conditions, the type of surface and the thickness applied.

As a general rule, for 1 cm thickness, KEDOPLAN WALL WHITE is dry in 24 to 36 hours.

If ambient temperatures exceed 30°C, moisten surfaces before and after applying KEDOPLAN WALL WHITE.