View larger 
FILLER WITH ROLLER APPLICATION
FILLER WITH ROLLER APPLICATION
TECHNICAL DETAILS
Filler with roller application.
To correct, trim and even out very damaged or deeply textured surfaces (fibre glass fabric, rough plaster, drips, etc.) Finish with a spatula.
The result is smooth and white.
Thickness of application: up to 3 mm per coat.
SUITABLE SURFACES
Concrete, brick tiles, gypsum blocks, aerated concrete, rough plaster, glass fabrics, coatings, etc.
REFERENCE DOCUMENTS
DTU 59.1.
PACK SIZE
10 kg bucket.
AFNOR NFT 36.005.
INSTRUCTIONS FOR USE
Do not apply at a temperature below 8°C or above 35°C, or on frozen surfaces.
AMOUNT REQUIRED
From 1 to 2 kg/coat/m² depending on quality of surface.
DRYING TIME
5 to 24 hours depending on conditions and quantity applied.
RECOMMENDED APPLICATION
To avoid all traces of filler, finish with a slightly rounded action.