SMOOTH FINISH FILLER FOR BATHROOM AND KITCHEN USE

Ready-mix light and water-repellent paste coating for a good finish on walls in rooms exposed to moisture : kitchens and bathrooms. 

Provides excellent surface preparation before painting or hanging coverings. 

Emulsion resin, calcium carbonate, light, water-repellent additive and various additives. 

The mixed paste is green in colour. 

• Plasterboards

• Plaster tiles

• Terracotta tiles

• Concrete

• Cement coating

• Renovation and filling coating for kitchen and  bathroom use

• Paintwork

• Wall covering

• Granulometry : Up to 0.2 mm

• Adhesion : complies with NFT 30 608

• pH : 8

• Solid content : 65 %

1 and 5 kg buckets on shrink-wrapped pallet. 

6 months in unopened original packaging stored away from frost and intense heat. 

Classification AFNOR NFT 36.005 Family III - Class 2.

The temperature during application and drying must be between 8 and 35°C.

Do not apply to damp surface. 

Surfaces must comply with DTU 59.1, i.e. be clean, dry, dust-free and free from all traces of form oil. 

Apply using a smoothing trowel or filling knife.

Up to 1 mm in one pass. 

Approx. 150 to 200 g/m². 

This depends on ambient conditions, the type of surface and the thickness applied.

On average the filler is dry in 12 to 24 hours.