FILLER FOR KITCHEN AND BATHROOM USE

Ready-mix paste coating for renovating rooms exposed to moisture: kitchen and bathroom. 

Can be used for filling work. 

Bonds well to tiling. 

Emulsion resin, calcium carbonate, water, rheological agent and various additives. 

The mixed paste is off-white colour. 

• Plasterboards

• Plaster tiles

• Terracotta tiles

• Concrete

• Cement coating

• Tiling 

• Paintwork

• Fibre glass fabric 

• Rough plaster 

Coverings

• Light smooth finish coating for kitchens and bathrooms

• Paintwork

• Wall covering

• Granulometry : Up to 0.6 mm 

• Adhesion : complies with NFT 30 608

• pH : neutral 

• Solid content : 80% 

1 and 5 kg buckets on shrink-wrapped pallet. 

330 g tube. 

6 months in unopened original packaging stored away from frost and intense heat. 

Classification AFNOR NFT 36.005 Family IV - Class 4B.

The temperature during application and drying must be between 8 and 35°C.

Do not apply to damp surface.

Surfaces must comply with DTU 59.1, i.e. be clean, dry, dust-free and free from all traces of form oil.

Apply using a smoothing trowel or filling knife.

Approx. 1.5 kg/m²/mm thickness.

This depends on ambient conditions, the type of surface and the thickness applied.

On average the sealant is dry in 24 to 48 hours.

Up to 3 mm in one pass.

On tiles, fill joints before coating to avoid the appearance of joints after work.