Ready-to-use coating paste for smoothing irregular surfaces on interior and exterior walls.
Particularly suitable for damp areas. (Kitchen, bathroom, toilet etc.).
Emulsion resin, calcium carbonate, water, rheological agent and various additives.
The paste is off-white in colour.
• Plasterboard panels
• Plaster blocks
• Ceramic tiles
• Cement coating
• Old paint
• Glass web fabric
• Sanded and printed wood
Plaster-based top coat.
Coating complies with standard NFT 30 608.
DTU 59.1 : Painting work.
PV CEBTP N°2352.6.740/1 :
• Permeable to water vapour
• Adhesion-cohesion measurement before and after climatic cycles
• Granulometry : up to 0.6 mm
• Adherence : complies with NFT 30 608
• pH : neutral
• Dry extract : 80%
5 and 15 kg on covered pallet.
6 months in unopened original packaging, away from frost and extreme heat.
CLASSIFICATION AFNOR NFT 36.005. FAMILY IV - CLASS 4 B. COMPLIES WITH DTU 42.1.
The temperature during application and drying must be between 8 °C and 35°C.
Do not apply to damp surfaces.
Surfaces must comply with standard DTU 59.1, and be clean, dry and free from dust and any trace of separating agent.
To be applied using a smoothing trowel or coating knife.
Up to 5 mm for each layer.
Around 1.5 kg/m²/mm thickness.
Depends on the ambient conditions, the nature of the surface and the thickness of application.
Generally speaking, when spread to a thickness of 5 mm, HERCULE dries in 24 to 36 hours.
Coating specifically recommended for renovation of damp spaces, thanks to its special formulation containing 100% water-resistant resins.