Ready mixed joint compound specially formulated for interior use on round edged plasterboard joints (quality Q1 to Q4).
Also allows for the filling of taper edged plasterboard with sealing tape.
Also suitable for all filling and smoothing work before finishing.
Water, calcium carbonate, emulsion resin, extender, and various additives. The resulting paste is white.
Interior walls and ceilings:
• Aerated concrete
• Old tiling
• Plaster boards
• Old paintwork
Once the sealant is completely dry it can be covered by all types of paints, plaster-based sealants, and wallpaper paste.
DTU 25.41. EN 13963. CE marking.
DTU 59.1: Building painting work.
EN 16566: paint sealants for interior work.
• Second coat time : 12-48 hours depending on work
• Paste density : 1.50 kg/L
• 4-point bending : > 30 daN
• Adhesion : > 0.5 MPa complies with EN 16566
The temperature on application and during drying must be between +5 and +30°C.
Do not apply at a humidity levels above 70 %. Do not apply on damp surfaces.
Do not use paste that has begun to set.
Do not inhale dust while sanding