CE 78 P
ÂTE View larger

CE 78 PASTE


Coating for plasterboard joints

The ready-mixed alternative to CE 78, this adhesive coating offers the same technical performance. 

VOC: A+. 

BENEFITS

• Ready-mixed: quick and easy to use 
• Excellent finish quality



More details

 
CE 78 PASTE
RECOMMENDED APPLICATION

Always leave a minimum gap of 20 cm between doors and windows and the first plasterboard joint. 


COMPOSITION AND APPEARANCE

Resin, water, calcium carbonate, lightening fillers, preservative and various additives.

The paste is white in colour. 


SUITABLE SURFACES

All types of plasterboard with or without insulation (glass wool, rockwool, polystyrene) with tapered edging and plasterboard surfaces. 


COVERINGS

Sealing undercoat for plasterboard.

Finish coating.


REFERENCE DOCUMENTS

Certificate QB N°20-05-764. 

DTU 25.41 and DTU 25.42. NF EN 13963. 


TECHNICAL CHARACTERISTICS

Tape adhesion : > 1000 g

Cracking : no cracking up to 5 mm thickness

Density : 1.7

Reaction to fire : A2s1d0


PACK SIZE

Buckets 5 and 25 kg on shrink-wrapped pallet. 


STORAGE

9 months in unopened original packaging stored away from frost and intense heat. 


PREPARATION OF SURFACES

The plasterboards must be fixed in accordance with DTU 25.41 & 25.42.

Cuts in boards must be bevelled and free from dust.


APPLICATION

Before treating the joints themselves, cover edges between accidentally non-abutting panels and various fillers (spalls, deterioration in cladding, etc.)

Apply manually by “buttering” the tapering using a 10 or 15 cm filling knife and positioning the tape (ground surface against the coating).

Then make a finishing pass, allow to dry and finish to mask the tape.

Also mask the screw heads.

Apply a tape in the ceiling, ensuring that the concrete shows no trace of form oil.

If there are vertical angles projecting, use a reinforced tape (frame arranged on the board) or a metal angle section.

Application on metal and micro-profile corner piece.


AMOUNT REQUIRED

Approx. 500 g/m² of boards.


DRYING TIME

The second coat can be applied 2448 hours after the first, depending on the ambient conditions.


RECOMMENDED APPLICATION

Always leave a minimum gap of 20 cm between doors and windows and the first plasterboard joint. 

 
Subscribe to our newsletter