2 IN 1 COATING

Ready-to-use coating paste coating specially formulated for use on tapered-edge plasterboard joints, to be used with jointing tape.

The coating comes mixed : it is suitable for gluing and finishing the tape.

Resin, water, calcium carbonate, preservatives and various additives.
The paste is white in colour.

Cracking : Up to 5mm thickness with no cracking.

All types of plasterboard with or without insulation with tapered-edges and gypsum plasterboard.

5kg tubs.

First undercoat for plasterboard. Plaster-based smoothing coat. Wallpaper; paint and other wall coverings.

9 months in unopened original packaging, away from frost and extreme heat.

Keep out of reach of children.

The temperature during application and drying must be between + 5 °C and + 30 °C.

Do not apply to damp surfaces. Do not use on frozen surfaces.

Surfaces can be re-coated 24 hours after the application of the first layer.

The cut panels should be bevelled, and free from dust.

Application is carried out manually, spreading the thinned the product with a coating knife across 10 or 15 cm, before laying the tape in position.

In the event of projecting vertical angles, use reinforced tape (frame placed at the side of the panel).

Apply tape to the internal ceiling corners, making sure that the concrete is free of any trace of forming oil.

The surface must be dry and free of any type of powder or insufficiently adherent product.

Approximately 500g/m² of panels.

To save time, remember to prepare the jointing tape in advance, cutting it to the correct length.