Resin, water, calcium carbonate, lightening fillers, preservative and various additives.
The resulting paste is greyish white.
All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) wih tapered edges and paper facing.
CE 78 PATE LIGHT is a light, ready-to-use paste filler designed specially for jointing tapered edge plasterboard in combination with jointing tape.
Primer undercoat for plasterboard.
Technical report N° 9/96-611, DTU 25.41 and DTU 25.42.
• Adherence of tape : > 1000 g
• Cracking : no cracking up to thickness of 5 mm
• Density : 1.7
18 kg tubs on film-wrapped pallet.
9 months in original unopened package, protected from damp.
Plasterboard will be attached as per DTU 25.41 25.42.
Cut edges of boards must be bevelled and dusted.
Before jointing fill gaps between boards and any irregular joints and repair any damaged board.
Apply manually by using a 10 or 15cm filling knife and apply the tape – milled face against the board.
Then apply a finish coat, allow to dry and finish to cover the tape.
Application on metal and micro-profile corner piece.
Around 350g.m2 of board (500g/m2 for traditional filler)
Recoating is possible 24-48 hours after application of the first coat depending on the weather conditions.
Always keep a minimum distance of 20 cm between door or window frames and the nearest plasterboard joint.