CE JOINT CEMENT

CE 78 JOINT CEMENT is a powder filler designed specifically for jointing tapered edge plasterboard in combination with a joint tape.

The mix can be used for more than 24 hours, and application can be mechanical or manual.

Powder filler based on calcium carbonate, resin and various additives.

The mix obtained is white.

All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with tapered edges and paper facing.

• DTU 25.41 and 25.42

• CE marking

• DoP

• Certificate EN 13963

• Certificate QB 311-16-731

• Setting time : air drying

• Strip adhesion : > 1,000 g

• Fracturing : no cracking up to 5 mm thick

• Density : 0.8

• Reaction to fire : A2s1d0

25 kg bag.

9 months in original unopened package, protected from damp.

Before jointing fill gaps between boards and any irregular joints and repair any damaged board.

Apply manually by using a 10 or 15cm filling knife and apply the tape – milled face against the board.

Then apply a finish coat, allow to dry and finish to cover the tape.

Also cover screw heads.

Apply a tape into the ceiling joins and ensure that the concrete is free of any signs of mould-release oil.

For vertical protruding angles use a reinforced tape (metal side against the board) or a metal angle bead.

Approximately 350 g/m² of board.

Recoating is possible 8 hours after application of the first coat.

CE 78 Joint Cement is only to be used in hot and dry weather.