RP1

Plaster-based powder filler, special cements, calcium carbonate, resin, cellulose fibre and various admixtures.

The compound obtained is white in colour.

• Setting time : 30 to 40 minutes

• Hardening time : 1 to 2 hours.

• Second coating : after 3 hours (depending on the application conditions).

• Adherence : complies with NFT 30 608

All types of interior surfaces (walls and ceilings) complies with DTU 59.1 : plaster, plasterboard, plaster blocks, concrete, cement coating, breeze blocks, cellular concrete, bricks, ceramic, old paintwork, old painted fibreglass, floor tiles, wall tiles, etc.

After the filler has completely dried, it can be covered using all types of paints, plaster-based coatings, paste coatings, wallpaper paste.

6 months in unopened original packaging, away from dampness.

Dangerous, follow the instruction for use.

Not for outdoor use. Do not use product that has begun to harden.

The temperature during application and drying must be between 8°C and 35°C.Wearing of gloves is advised.

Depends on the ambient conditions, the nature of the surface and the thickness of application. SEMIN RP1 dries very rapidly.

Under normal conditions, a second coat can be applied approximately 3 hours after application of the first coat.

Surfaces must comply with standard DTU 59.1 and be clean, dry and free from dust and any trace of separating agent. Correctly open up, bevel and dust off the cracks.

Around 6 to 6.5 litres of water per 15 kg bag. 0.4 to 0.43 litres of water per 1 kg. 2 parts water for 5 parts powder.

Apply with a decorator's knife or putty knife.

Approximately 1 kg per m²/mm thickness.

Open up and bevel the cracks before treatment.

Treat powdery surfaces with DURCIFOND. Mix to the consistency of mastic for larger filling applications.