KEDOLITH

Shrink-free interior-exterior repair filler with high adhesion.

• Filling : holes and cracks, pointing, cellular concrete

• Repairs : cornices, window reveals

• Sealing : hinges and pins

• Filling : facades, rough-casting, building blocks

Cement base powder filler containing sand, resin and various additives. 

The resulting paste is grey.

Any type of clean, sound, dry, dust-free substrates free of all traces of oil: masonry, concrete cement render.

DTU 42.1.

Once the filler has dried entirely, may be covered with any type of paint, plaster-based fillers, ready mixed fillers, cement or RPE fillers.

• Particle size : fine

• Adherence : in conformity with DTU 42.1

• pH : alkaline

• Start of setting : 40 min

• End of setting : 1 h 30 min

Sacks of 5 and 15 kg on film-wrapped pallet.

6 months in unopened original packing protected from damp.

THE APPLICATION AND DRYING TEMPERATURE MUST BE INCLUDED BETWEEN 5°C AND 35°C.
DO NOT APPLY TO PLASTER, OLD PAINTWORK AND OLD RPE FILLERS.
DO NOT USE MIX THAT HAS BEGUN TO SET.
DO NOT APPLY TO FLOORING.

Substrates must be clean, dry, free of dust and of any traces of formwork release oil.

It is essential that the substrates offer good adhesion.

Otherwise, harden the substrate with PRIM-SM.

Approximately 1.5 l. of water per 5 kg sack (or 4.5 l. for 15 kg).

Up to 2 cm in one application.

Around 1.3 kg/m²/mm thickness.

Depends on the atmospheric conditions, the type of substrate and the application thickness.

As a general rule, for 1 cm thickness, KEDOLITH dries in 12 hours.

To apply generous thicknesses of KEDOLITH add approximately 20% sand (particle size 0-2 mm).

Dangerous, follow the instruction for use.