PLASTER OF PARIS

Natural plaster for moulding, sealing, interior fillingand relief decor.

Plaster base powder filler containing setting retardant and thickener.

The resulting mix is white.

Concrete, mortar, breeze blocks, floated cement, plaster bricks, plaster and prefabricated drywalls.

Once completely dry the filler may be covered with any type of paint, plaster based fillers, ready mixed fillers or wall paper.

Tile adhesives must be suitable for a plaster substrate.

DTU 59.1: interior plaster filling jobs.

• Particle size : fine

• pH : neutral

• Start of setting : 45 min

• End of setting : 1 hour

Sacks of 1.5 and 5 kg on film-wrapped pallet.

9 months in unopened original packing protected from damp.

THE APPLICATION AND DRYING TEMPERATURE MUST BE ABOVE 5°C.
DO NOT USE PASTE THAT HAS BEGUN TO SET.
WET THE SUBSTRATE BEFORE APPLICATION.

The substrates must be in conformity with DTU 59.1, i.e., be clean, dry, free of dust and any trace of formwork release oil.

Approximately 2.5 to 3 l. of water per 5 kg sack.

Any thickness.

Approximately 0.8 kg/m²/mm thickness

Depends on the atmospheric conditions, the type of substrate and the application thickness. 

As a general rule, for 1 cm applied thickness, PLASTER OF PARIS dries in 3 hours.