ROC COATING

Filler with fibres for interior use.

• Fills : holes, cracks, grooves

• Seals and fixes

• Bonds : polystyrene, roses, cornices

ROC-ENDUIT is ideally suited for big filling jobs.

Plaster base powder filler containing calcium carbonate, resin, cellulose fibre and various additives.

The resulting paste is off-white.

All types of interior substrates: plaster, plasterboard, plaster blocks, concrete, cement render, breeze blocks, cellular concrete, brick, earthenware.

Sacks of 5 and 20 kg on film-wrapped pallet.

Once completely dry the filler may be covered with any type of paint, plaster based fillers, ready mixed fillers or wall paper.Tile adhesives must be suitable
for a plaster substrate.

Filler in conformity with standard NFT 30 608.

DTU 59.1 : Painting.

• Particle size : up to 800 μm

• Adherence : in conformity with NFT 30 608

• pH : neutral

• Start of setting : 30 min

• End of setting : 50 min

9 months in unopened original packing protected from damp.

THE APPLICATION AND DRYING TEMPERATURE MUST BE ABOVE 5°C.
DO NOT APPLY TO DAMP SUBSTRATES.
DO NOT USE MIX THAT HAS BEGUN TO SET.

The substrates must be in conformity with DTU 59.1, i.e., be clean, dry, free of dust and any trace of formwork release oil.

Open up any cracks properly.

Approximately 2.5 to 3 l. of water per 5 kg sack (or 12.5 to 15 l. of water per 25 kg sack) depending on the job.

Apply with a filling knife.

Any thickness.

Approximately 1 kg/m²/mm thickness.

Depends on the atmospheric conditions, the type of substrate and the application thickness. 

Approximately 3 hours for filling depths no greater then 5 mm and 1 day for deeper applications.