SEMIN R

Multi-purpose filler for interior use.

• Filling holes, cracks, chases

• Fixing and bedding

• Pasting polystyrene, roses, cornices

• Finishing

Powder filler composed of plaster, calcium carbonate, resin, cellulose fibre and various additives. 

Produces a white paste.

All types of interior substrates: plaster, plasterboards, plaster blocks, concrete, cement rendering,concrete blocks, aerated concrete, brick, earthenware,…

Complies with standard NFT 30 608.

DTU 59.1 : paintwork.

Once completely dry, SEMIN R can be covered with any type of paint, plaster-based filler, paste-like filler and wallpaper paste.

For tiling, choose an adhesive suited to plaster substrates.

• Grain size : fine

• Adhesion : complies with standard NFT 30 608

• pH : neutral

• Setting starts after 50 minutes

• Setting ends in 1 hr 10 min

• Bending : 3 N/mm2

• Compression : 7 N/mm

1.5 - 5 - 15 - 25 kg bags on wrapped pallet.

12 kg buckets on wrapped pallet.

9 months in original unopened packing protected from damp.

THE TEMPERATURE DURING APPLICATION AND DRYING MUST BE SUPERIOR TO 5°C.
DO NOT USE ON A DAMP SUBSTRATE.
DO NOT USE ONCE THE PASTE HAS STARTED TO SET.

The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil.

Cracks need to be open up.

Use 2.5-3 liters of water for one 5 kg bag (or 12.5 -15 liters for one 25 kg bag) depending on the type of job. For filling, the less water there is in the mixture, the less the filler shrinks.

Apply with a filler knife.

Up to 2 cm in one coat.

1-1.2 kg/m²/mm thickness.

This depends on the weather conditions, on the type of substrate and on the applied thickness. 

As a general rule, for 1cm thickness, SEMIN R dries in 6 hrs

To achieve long-lasting results, open up, clean and bevel cracks before applying SEMIN R.