Acrylic adhesive in aqueous dispersion with fungicidal treatment.
Easy removal – glue stains can be removed by washing with water restoring substrate to original condition.
Acrylic resin emulsion, tacking agent, thickener and various additives.
The paste is ivory in color.
• Special floor plasterboard
• Floor levelling compound
• Anhydrite screed
• Heated flooring
• Wooden panels
Tubs of 10 kg on film-wrapped pallet.
• PVC coverings (Plain or foam-backed) in tiles or widths
• Carpet or tufted carpet with SBR backing, latex, PVC or polypropylene
• Textile covering with action back
• Cork tiles
• Fibre mats with SBR foam backing
DTU 53.1 (textile floor coverings) and 53.2 plastic floor coverings).
See CSTB Book N° 2055.
• Tack time : 5 min
• Open pot life : 60 min
• Setting time : 24 to 48 hours
• Density : approximately 1.4
• Dry matter : 73%
6 months in unopened original packing protected from cold and strong heat.
CLOSE THE PAIL AFTER USE.
WORKING TEMPERATURE RANGE: 10 TO 25°C ON ANHYDRITE SCREED, SAND SURFACE, DUST AND APPLY OUR PRIM-SM PRIMER. ON PARTICLE BOARDS, APPLY
PRIM-SM. TO LAY ON HEATED FLOOR, TURN OFF HEATING 48 HOURS BEFORE APPLICATION AND TURN ON GRADUALLY 48 HOURS LATER. UNSUITABLE FOR LAYING LINOLEUM
The substrate must be clean, sound, dry, solid, smooth, flat and normally absorbent.
On irregular substrates first apply our KEDOPLAN SUPER P3 levelling compound.
From 150 to 250 g/m2 depending on covering and application tool.