SEM SOL XXL View larger

SEM SOL XXL


High-performance adhesive for technical floor coverings also suitable for wall coverings

SEM-SOL XXL is the ideal solution for demanding floor jobs and the pasting of technical floor coverings.

It allows for a comfortable and safe use, and also offers the possibility to lay wall coverings.

BENEFITS

• Before applying adhesive to the floor, unroll the covering to remove any creases
• Then fold it back halfway, apply adhesive and smooth out 
• Do the other half the same way


 
SEM SOL XXL
TECHNICAL DETAILS

Solvent-free, fungicidal, acrylic adhesive for plastic and textile wall coverings. 

SEM-SOL XXL is a high-performance adhesive for floor coverings characterized by :

• A short tacking time (5 to 10 minutes)

• A long working life (approximately 40 minutes) allowing for a comfortable use

• A high gripping power allowing strong bondage for responsive coverings

• An important residual tack offering the possibility to bond PVC against PVC

SEM-SOL XXL is also suitable for the laying of PVC wall coverings on blocked or unblocked substrates.


REFERENCE DOCUMENTS

DTU 53.1 (textile floor coverings) and 53.2 (plastic floor coverings).

CSTB Book Nr. 2055.


COMPOSITION AND APPEARANCE

Emulsion acrylic resin, tacking agent, thickener and various additives. 

The paste is ivory in colour.


ACCEPTED SUBSTRATES

Interior flooring

• Concrete

• Heated flooring

• Special floor grade plasterboard

• Self-levelling compound

• Anhydrite screed

• Wood panels


COVERING

Interior floor coverings

• Carpet or tufted with foam back or synthetic action back

• PVC coverings (consistent or foam back)

• Semi-flexible tiles

• Relief-patterned expanded vinyl coverings.

Interior wall coverings

• Expanded or extruded polypropylene

• PVC coverings (consistent or foam back)

• Cork tiles with PVC back


TECHNICAL CHARACTERISTICS

• Tacking time : 5 to 10 minutes

• Open pot life : 45 minutes

• Setting time : 24 to 48 hours

• Density : approximately 1.4


PACK SIZE

20 kg tubs on film-wrapped pallet.


STORAGE

12 months in unopened original packing protected from frost and high heat.

ON ANHYDRITE SCREEDS, SAND THE SURFACE FILM, DUST AND APPLY OUR PRIM-SM PRIMER.
ON PARTICLE BOARD, APPLY OUR PRIM-SM PRIMER. 
TO LAY ON HEATED FLOOR, TURN OFF THE HEATING 48 HOURS BEFORE APPLICATION AND TURN ON GRADUALLY 48 HOURS LATER.
UNSUITABLE FOR LAYING LINOLEUM.
SEAL THE TUB AFTER USE.
WORKING TEMPERATURE RANGE: 10 TO 25°C.


PREPARATION OF SURFACES BEFORE APPLICATION

The substrate must be clean, sound, dry, solid, smooth, flat and normally absorbent.

On irregular floor surfaces, first apply our KEDOPLAN SUPER P3 self-levelling compound.

Humidity within the substrate must not exceed 3%.


CONSUMPTION

250 to 350 g/m2 depending on the covering and application tool.

 
Subscribe to our newsletter

Semin takes your privacy seriously

Semin-plaster.com uses cookies, including third-party cookies, on its website to provide you with, analyse, and improve your user experience.

You are free to accept or reject cookies.

By clicking on Personalize cookies , you can learn about how your data is used. For more information, please refer to our cookies privacy policy.

Customize Cookies

Audience measurement

These cookies provide statistics on how many times our website is visited. Turning cookies off prevents us from monitoring and improving our services