The AluRapid fire-rated access panel is particularly suit- able for use in partition wall systems, service ducts, and dry wall cladding.
It can also be installed in solid walls of different types. The aluminium installation frame is reinforced with fire protection panels at the rear and an insertable fire-resistant divider made of fire protection panels. The cover is made of galvanised steel.
It is held in position by magnets. Wall mounting is made easy by adjustable mounting clips and pre-drilled holes in the mounting frame.
Possibility of a different finish to standard plasterboard: wood, metal, tiling, etc.
Acceptable substrate: plaster board or concrete.
Minimum thickness of the partition: 40 mm.
• Certified according to standard DIN EN 13501 -2.
• Fire report CSTB RS-19-065.
Insert mounting frame into the wall and secure with the attached mounting clips.
Prepare cuts matching the supplied intumescent strips and hermetically seal with the wall at the back.
Depending on the type of wall, proceed step-by-step according to the mounting instructions provided.