HUMI’PROTECT

Powder coating made of cement, sand, water, calcium carbonate, resin and various additives.

The resulting paste is white.

All types of rough surfaces constructed from dry and wet masonry: cement, concrete, cinder blocks, stone, brick

Bags of 6 and 20 kg.

Do not apply to paints, plaster, wood and sweating walls. Not suitable for treating buried walls.

Do not apply in an environment that is immersed in water. This is not a waterproofing mortar.

The temperature for application and while drying should be between 8-35°C.Dangerous. Follow the precautions for use.

Contains cement: wearing gloves is recommended.

Dangerous, follow the instruction for use.

Safety Data Sheet available at www.quickfds.com. Consult before use.

Apply using a plastering trowel : 1 or 2 coats to smooth over any bumps.

Apply in 2 cross-coats using a wide brush (use a more liquid consistency).

Clean tools with water.

Max 5 mm.

Approximately 1.1 kg per m²/mm of thickness.

• Setting time : 3 hrs

• Adhesion : compliant with standard EN 16566

• AFNOR classification NFT 36.005 - Family IV class 4c

• High vapour permeability : class V1 according to ISO 7783-2

• Low liquid permeability : class W3 according to ISO 1062-3

When applying with a wide brush, mix to a more liquid consistency (like whitewash).