Decorative, visible-grain coating in ready-to-use paste form for spraying onto interior walls and ceilings.
Highly white, matt and filling, DECO-GRANIT is dotted with small marble grains, which help to smooth out irregularities in the substrate.
Emulsion acrylic resin, mineral filler, marble grains, conservation agent and various additives.
The paste is white and designed for spray-on coating.
DECO-GRANIT can be left unpainted or covered with paint.
• More or less “bubbled” concrete
• Aerated concrete
• Plaster finishes
• Cement renders
• Earthenware blocks
• Old paintwork
• Plaster blocks
• Dry matter: 71 %
• Density: 1.6
25 kg tubs with handle on film-wrapped pallet.
6 months in unopened original packing protected from frost and high heat.
DO NOT USE WHEN TEMPERATURES ARE BELOW 5°C OR ON FROZEN SUBSTRATES.
IF DECO-GRANIT IS DESTINED TO BE PAINTED, WAIT AT LEAST 3 DAYS BEFORE COVERING.
PLASTERBOARD MUST BE PRIMED.
To obtain a decorative finish, spray on (using any type of sprayer) while adjusting the product flow, the airflow and the nozzle for different finishes.
Clean tools in water.
For decorative effects: approximately 1.5 kg/m2 depending on the texture.
Approximately 24 to 48 hours depending on the quantity applied.
The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil.
Sand and wash down old paintwork.
For very rough substrates, apply a first coat of smoothing filler (PARILIS GROS, SEMIN DEGROSSISSAGE, SOLIDECOR GARNISSANT,...).